Home > SMD Gasket >

20mm SMD Gasket Elastic Recovery , Silicone Flat Round Rubber Gaskets

Product Categories

QINGDAO FRS ELECTRONICS CO., LTD

Contact Now

20mm SMD Gasket Elastic Recovery , Silicone Flat Round Rubber Gaskets

Brand Name : PAN

Model Number : PAN-10-10

Certification : SGS,ROHS,CCC

Place of Origin : KOREA

MOQ : 10000

Price : 0.1~0.5/pcs

Payment Terms : T/T, Western Union, MoneyGram, L/C, D/A, D/P

Supply Ability : 20000000/week

Delivery Time : 7~14 workdays

Packaging Details : box

Product : WHL202020

PL Film : Sn plating/Au plating

Shape : Flat Gasket,Ring Gasket, Corrugated Gasket,as you need,according to your drawings

Wide : 20mm or custom Size

High : 20mm,Standard or Customize

Length : 20mm As Drawing

Application : computers,wall and roof, Automobile,LCD etc

Contact Now

SMD Gasket,WHL202020Surface Mount Technology, Elastic Recovery,Electricity Production

1. WHL: 202020

2. Product Characteristic

SMD GASKET is a surface mount technology utilizes surface mounter ( SMD M/C) PCB mounting and is available as a ground terminal and the mount an electric/electronic devices,and EMI noise reduction products. SMD GASKET is suitable for the required flexibility, elastic recovery, heat resistance and electrical conductivity tanwol products.

3. Material and Finish

NO	ITEM	Material	Plating
1	Silicone	Silicone
2	PI Film		Sn plating

PRESS	NO BURR
PLATING	NO Discoloration
Contact Resistance	50mΩ (Max.)
After the test	100mΩ (Max.)

4 Drawing

5 Packaging Management Table

Check List	- It must be attached on REEL and Vinyl bag .	0
MSL SPEC attach (MSL: MOISTURE SENSITIVE LEVEL)	- It must be attached on REEL and Vinyl bag .
Lead Free Mark attach	It must be attached on REEL and Vinyl bag .
Keep Dry" LABEL attach	- The label of "Keep Dry" must be attached on the product which is under MSL 1
Packaging Specification	- Should be applied at least MSL 2. - The material of REEL should be plastic. (Don't use paper REEL.)
REEL sealed package	- Must be sealed.
REEL COVER TAPE compression method	Use a heat compression method
Packing flow	Reel →Put in the silica gel → Seal the bag→ OUT BOX

Packing Spec

(1) Moisture Sensitivity Level : MSL-1

(2) Carrier Tape Compression Method : Heat Compression Method

(3) Desiccant Spec : Silica Gel

(4) Static Electricity Production Max. 100V

(5) Reel materials will have to apply a plastic type quality of material

1.Prepare the upper and lower gold-plated compressed

2.Product Total Height: 30% compression

Adhesion Method

Test Method

1. prepare the pcb Solder product

2 .push product total height 50%

3. Measurement Speed:0.5mm/sec

Conductive metal layer on the silicone rubber surface

· Innovative product with soft silicone rubber properties and conductive metal properties at the same time.

· Improved EMI shielding and grounding performance due to thicker conductive surface layer.

· Improved corrosion resistance and reliability by not exposing the copper layer to outside air.

Easy to adjust product softness

· Adjusting the hollow size and shape to soften the gasket minimizes stress on and improves adhesion to PCB.

· Metal surface layer is possible even when the silicone rubber core is thin, improving the disadvantage of its hardness when the silicone rubber is thick.

· Easy to adjust the shape, number, and thickness of the core hollow.

Product Tags: